high frequency veneer dryer machine

High Frequency Vacuum Timber Dryer

It is suitable for efficiency eliminating the stress of timber ( especially secondary drying and balancing of timber ), quick drying of large cross section thick timber, quick drying of hard timber ( especial redwood ), quick drying of small batches of timber, drying of floor and surface plate, drying of single plates, etc.

Features:

Adopts High frequency drying technology, inside and outside of wood timber is heated at the same time, uniform heating, high speed drying, short drying time and good quality. Which can keep the timber nature color, meanwhile, the timber is aerated under the vacuum environment, non-cracking,especially applied for the thick and hard wood, or secondary drying for wood.

The timber is vaporized at low temperature in vacuum environment and is not easily deformed and cracked.

It can also dry blank for solid wood flooring, the veneer flatness is good and operation is simple.

Timber stress can be effictively eliminated and timber moisture content can be balanced.

It is eco-friendly and safe and does not require a boiler.

Typical drying parameters: The dry thickness of hard timber ( red timber ) is 6cm, it only takes 6 days to dry rosewood with moisture of 35%-50% to 11%-13% and secondary balanced drying of timber can be performed ( only taking several hours ).

SHANDONG GEELONG MACHINERY EQUIPMENT CO.,LTD

高频干燥机 设备参数

1、Technical parameter:

2、Outline picture: